Wej-It Ankr-TITE ATS Wedge Anchor, 304 Stainless Steel, Meets QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1 Specifications, 3/8" Diameter, 7" Length, 4-1/2" Threaded Length (Pack Of 50)
Wееklу Tор Sаlе Wej-It Ankr-TITE ATS Wedge Anchor, 304 Stainless Steel, Meets QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1 Specifications, 3/8 Diameter, 7 Length, 4-1/2 Threaded Length (Pack Of 50) Simple review
So you can check out the other reviews at Amazon.com
only with $
| Material | Stainless Steel |
| Grade Rating | 304 |
| Thread Size | 3/8"-16 |
| Exterior Finish | 304 |
| Brand | Wej-It |
- Wedge anchor provides a secure hold in solid masonry and uncracked concrete
- Anchor consists of a 304 stainless steel body, washer, nut, and clip to provide more corrosion resistance than galvanized or zinc-plated steel anchors
- Meets Fed. Specs. QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1, and complies with Miami-Dade NOA #08-0911.02 code
- Ultimate tensile strength is 3,850 lb. at 1-3/4" embedment depth in 4,000-psi concrete with a static load
- Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Product Description
The Wej-It Ankr-TITE ATS wedge anchor with 304 stainless steel body provides a secure hold in solid masonry and uncracked concrete, meets Federal Specifications QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1, and complies with Miami-Dade NOA #08-0911.02 code. The anchor body, washer, nut, and clip are made of 304 stainless steel for increased corrosion resistance compared to galvanized or zinc-plated steel anchors. It must be installed into a drilled hole with a diameter equal to that of the anchor to an embedment depth of 1-3/4" or greater. The washer lies flush against the mounting surface when the anchor is inserted into the hole, and the nut tightens with a wrench to draw the threaded portion of the anchor up, causing the clip to expand and secure the anchor in place. The clip has large dimples that provide traction to reduce slippage and increase hold in lightweight concrete. The dog point prevents damage during installation, and the safety shoulder above the clip provides support when the anchor is under severe strain.
Specifications
Ultimate Tensile Strength for Static Loads
| Anchor Diameter | At Embedment Depth | 4,000-psi Concrete | 6,000-psi Concrete |
| 1/4" | 1-1/4" | 2,000 lb. | 2,042 lb. |
| 1/4" | 2-1/2" | 2,600 lb. | 2,826 lb. |
| 3/8" | 1-3/4" | 3,850 lb. | 4,790 lb. |
| 3/8" | 4-5/8" | 6,020 lb. | 6,635 lb. |
| 1/2" | 2-1/8" | 6,324 lb. | 7,540 lb. |
| 1/2" | 6-1/4" | 8,249 lb. | 10,713 lb. |
| 5/8" | 2-5/8" | 9,527 lb. | 10,597 lb. |
| 5/8" | 6" | 15,893 lb. | 16,705 lb. |
| 3/4" | 3-3/4" | 13,130 lb. | 18,979 lb. |
| 3/4" | 7-7/8" | 19,795 lb. | 24,145 lb. |
| 7/8" | 4" | 16,591 lb. | 19,945 lb. |
| 7/8" | 8" | 27,484 lb. | 33,113 lb. |
| 1" | 5" | 26,676 lb. | 30,683 lb. |
| 1" | 9" | 36,171 lb. | 36,171 lb. |
| 1-1/4" | 5-5/8" | 28,733 lb. | 28,733 lb. |
| 1-1/4" | 10" | 50,390 lb. | 50,390 lb. |
Ultimate Shear Strength for Static Loads
| Anchor Diameter | At Embedment Depth | 4,000-psi Concrete | 6,000-psi Concrete |
| 1/4" | 1-1/4" | 2,811 lb. | 2,811 lb. |
| 1/4" | 2-1/2" | 2,811 lb. | 2,811 lb. |
| 3/8" | 1-3/4" | 3,075 lb. | 3,075 lb. |
| 3/8" | 4-5/8" | 4,227 lb. | 4,227 lb. |
| 1/2" | 2-1/8" | 6,260 lb. | 6,260 lb. |
| 1/2" | 6-1/4" | 7,516 lb. | 7,516 lb. |
| 5/8" | 2-5/8" | 9,760 lb. | 9,760 lb. |
| 5/8" | 6" | 11,743 lb. | 11,743 lb. |
| 3/4" | 3-3/4" | 15,860 lb. | 15,860 lb. |
| 3/4" | 7-7/8" | 23,817 lb. | 23,817 lb. |
| 7/8" | 4" | 24,000 lb. | 24,000 lb. |
| 7/8" | 8" | 25,710 lb. | 25,710 lb. |
| 1" | 5" | 32,494 lb. | 32,494 lb. |
| 1" | 9" | 36,896 lb. | 36,896 lb. |
| 1-1/4" | 5-5/8" | 46,975 lb. | 46,975 lb. |
| 1-1/4" | 10" | 46,975 lb. | 46,975 lb. |
Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's literature.
Anchors provide reinforcement to fasteners installed in materials that are considered brittle or have insufficient hold such as drywall, concrete, brick, and stone. Anchors provide support through methods such as expansion from within or behind the substrate, or insertion of adhesive compounds into drilled holes.
Wej-It Fastening Systems manufactures mechanical and adhesive fasteners for use in concrete and drywall. The company, founded more than 60 years ago, is headquartered in Norwalk, CT.
Product Specifications
Specification for this product family
Clісk Hеrе : ➤➤
----------------------------
Hеу mу brо, Mаnу thаnkѕ fоr vіѕіtіng оur Wеbѕіtе. Arе уоu сurrеntlу trуіng tо fіnd fасtѕ аbоut Wej-It Ankr-TITE ATS Wedge Anchor, 304 Stainless Steel, Meets QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1 Specifications, 3/8 Diameter, 7 Length, 4-1/2 Threaded Length (Pack Of 50)Thе Gооd Nеwѕ, Rіght nоw wе'rе gіvіng bіg аѕ muсh аѕ 85% fоr реорlе whо buу Wej-It Ankr-TITE ATS Wedge Anchor, 304 Stainless Steel, Meets QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1 Specifications, 3/8 Diameter, 7 Length, 4-1/2 Threaded Length (Pack Of 50) рrоduсtѕ thrоugh thіѕ Wеbѕіtе.Nоt јuѕt thаt, уоu'll еvеn gеt уоurѕеlf а аbѕоlutеlу frее dіѕсоunt іn thе еvеnt thаt уоu оrdеr tоdау.Thаnkѕ fоr wаtсhіng аnd рlеаѕе gіvе а thumbѕ uр.
----------------------------Disclaimer:
Thіѕ Wеbѕіtе іѕ раrtісіраnt іn thе аmаzоn ѕеrvісеѕ llс аѕѕосіаtе рrоgrаm.I dо uѕе аffіlіаtе lіnkѕ whеn lіnkіng рrоduсtѕ іn thе Wеbѕіtе dеѕсrірtіоn.Thіѕ dоеѕ nоt аffесt уоur buуіng еxреrіеnсе оr іtеm рrісе but dоеѕ mеаn I rесеіvе а ѕmаll соmmіѕѕіоn оn іtеmѕ рurсhаѕеd uѕіng ѕuсh lіnkѕ.An аffіlіаtе аdvеrtіѕіng рrоgrаm dеѕіgnеd tо рrоvіdе а mеаnѕ fоr ѕіtеѕ tо еаrn аdvеrtіѕіng fееѕ bу lіnkіng tо wеbѕіtе аnd аmаzоn.соmWе аlѕо раrtісіраtеѕ іn аffіlіаtе рrоgrаmѕ wіth оthеr ѕіtеѕ. Wе аrе соmреnѕаtеd fоr rеfеrrіng trаffіс аnd buѕіnеѕѕ tо оthеr соmраnіеѕ.
---------------------------
0 Response to "Wej-It Ankr-TITE ATS Wedge Anchor, 304 Stainless Steel, Meets QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1 Specifications, 3/8" Diameter, 7" Length, 4-1/2" Threaded Length (Pack Of 50)"
Post a Comment